ZT Backhoe Loader — All-in-One Dig and Load Workhorse for Seamless Site Operations
Arranging a separate excavator and a separate loader for one site is where time and cost disappear. This backhoe wheel loader integrates digging, loading, transporting and levelling into one 7,840 kg machine, so the operator changes task without a machine swap. A 0.3 m³ rear digging bucket and a 1 m³ front loading bucket share one Cummins 75 kW engine and one hydraulic circuit.

Multi-Functional Strength, Dual-Role Superiority
0.3 m³ digging bucket at the rear, 1 m³ loading bucket at the front. The rear arm breaks ground and the front bucket moves spoil; both run off the same hydraulic circuit, so the operator changes task without leaving the seat.
7,840 kg operating weight, >25 kN rated lifting force. Enough mass to stay planted under a full 1 m³ bucket load, and enough lifting force to break frozen or compacted soil without stalling.
5,481 mm max. digging radius and 180° bucket rotation. Trench edges and corners are reachable without repositioning the chassis — including in narrow working areas where a straight-mounted backhoe cannot swing.
4,340 mm max. digging depth, 50 ±10% kN digging force, >40 kN breakout force. Water, gas and telecom trench profiles run inside these limits without benching the sides.
⚡ Strong Power & High Work Efficiency
Cummins 75 kW diesel engine. Stable, low-noise output designed for continuous working hours, with service reachable through the Cummins network in most export markets.
Straight-line digging, fast truck loading and smooth ground levelling. Grade ability above 30° and 70–75 kN traction power keep the machine productive on embankments and unpaved haul roads.
100 L diesel and 155 L hydraulic capacity. The working window between fills covers a full shift on most sites, which matters where the fuel truck only arrives once a day.
🎯 Suitable for Various Work Scenarios
🏗️ Construction sites. Foundation excavation and soil transportation on the same pass, which removes a machine change from the schedule.
🛠️ Municipal engineering. Pipeline laying, trench digging, sludge cleaning and debris removal in narrow urban streets and lanes; 4,300 mm turning radius against a 2,730 mm body width.
🌳 Landscaping projects. Planting pits dug accurately with the 0.3 m³ bucket and soil shaped with the front bucket — the precision that root-ball work needs.
Agriculture. Channel digging, dredging and yard clean-out; 500 mm ground clearance keeps the underside clear on uneven field surfaces.
🛠️ Behind the Machine: Two Decades of Export
More than 20 years of Chinese construction machinery export changes how the machine ships, not just how it is described. Bucket size, tyre specification and attachment set are confirmed against the buyer's ground conditions and typical job before the deposit. A 40HQ container carries two complete units with optimised packing, which halves the per-unit freight cost. Documentation, certificate of origin, customs clearance and shipping coordination are handled in-house.
Buyers comparing a compact wheel loader against a dedicated excavator usually arrive at the same question: does one machine that digs and loads beat two machines that do one thing each? On mixed municipal, agricultural and site work, the backhoe configuration usually removes a machine from the site and an operator from the payroll. Buyers weighing a Chinese front end loader against a European or Japanese brand frequently shortlist machines from SEM, Everun, Wolf or HZM alongside this unit; the deciding factors are usually parts availability, container loading cost and whether the configuration is fixed against the working conditions.
Every structural element — from the reinforced loading arms to the axle — is built from verified heavy equipment components. Our factory price direct-supply model removes intermediaries, and OEM branding, custom paint and third-party inspection (SGS / BV) are supported at any stage. Buyers adding components — buckets, hydraulic cylinders, seals, filters — consolidate them into the same container.
Technical Specifications
| Item | Unit | Parameter |
|---|---|---|
| Backhoe bucket capacity | m³ | 0.3 |
| Rated loading bucket capacity | m³ | 1 |
| Rated lifting force | kN | >25 |
| Equipment weight | kg | 7840 |
| Backhoe parameters | Max. digging radius (mm) | 5481 |
| Max. dump height (mm) | 3737 | |
| Radius at max. dump height (mm) | 1084 | |
| Max. digging radius at ground level (mm) | 5105 | |
| Digging bucket max. rotating angle (°) | 180 | |
| Max. digging depth (mm) | 4340 | |
| Max. digging force (kN) | 50 ±10% | |
| Loading parameters | Max. dump height (mm) | 2626 |
| Dump reach at max. dump height (mm) | 726 | |
| Bucket draw back angle — transportation position (°) | 43.5 | |
| Bucket draw back angle — ground position (°) | 36.5 | |
| Dump angle (°) | 43.5 | |
| Digging depth (mm) | 191 | |
| Max. breakout force (kN) | >40 | |
| Max. grade ability | ° | >30 |
| Max. traction power | kN | 70–75 |
| Min. turning radius | mm | 4300 |
| Wheelbase | mm | 2320 |
| Front wheel track | mm | 1910 |
| Rear wheel track | mm | 1820 |
| Minimum ground clearance | mm | 500 |
| Total length | mm | 7100 |
| Total height (cab) | mm | 2870 |
| Total width | mm | 2730 |
| Bucket width | mm | 2300 |
| Digging end bucket width | mm | 750 |
| Hydraulic tank | L | 155 |
| Diesel tank | L | 100 |
| Tire | 14-17.5 | 19.5L-24 |
| Voltage | V | 12 |
| Engine | — | Cummins 75 kW |
| Certification | — | ISO |
Manufacturing process certified to ISO; no other certification is claimed for this unit.
Product Overview
This wheeled backhoe loader integrates excavation and loading in a single unit. The compact profile, hydraulic steering and 4,300 mm turning radius make it maneuverable in urban infrastructure, forestry and agricultural work where a full-size excavator cannot enter.
Built for broad utility, the machine handles digging, hauling and grading. Its speed and precision suit waste-pile management and material handling for both large and medium-sized enterprises, and the 0.3 m³ rear bucket and 1 m³ front bucket cover mixed tasks without a machine swap.

Product Details


Packaging & Shipping
Container capacity. A 40HC container accommodates two units.
Machine securement. The main unit is secured inside the container with heavy-duty wire ropes instead of an enclosure.
Spare-parts packaging. Spare components and wear parts are packed in wooden cases or reinforced cartons.
Logistics method. Container transport is the primary shipping method, which keeps the machine intact through transit.

Service Offerings
Customisation services. OEM orders supported, including brand labelling, colour customisation and other specific modifications.
Parts provision. Steady supply of genuine spare parts with immediate availability.
Customer support. Factory visit arrangements and third-party quality inspections can be organised before shipment.
Responsive communication. All inquiries receive a reply within 24 hours.
Purchasing support. Dedicated agent services for procuring complementary machinery and consolidating it into the same shipment.

Frequently Asked Questions
Are you a manufacturer or a trader?
We are a manufacturer specialising in the production and export of construction machinery, including backhoe wheel loaders, compact mining loaders and related equipment. Production, welding, painting and final assembly are in-house.
What are your payment terms?
30% deposit by T/T in advance, with the balance payable before shipment.
What is your delivery lead time?
Typically 30 days after deposit. Actual time depends on product specification and order volume; some configurations may ship faster from stock.
Do you test all products before shipping?
Yes. Every unit undergoes a full inspection covering engine, hydraulic system, both working ends and the drivetrain before delivery.
What warranty do you provide?
12 months or 2,000 operating hours, whichever comes first, covering free replacement of defective parts within the period.
How do I get a wheel loader price for my destination?
Send the destination port and the configuration you need. The reply is a factory price for that specification, with export packing included and no intermediary margin added. Two-unit orders share the 40HC container cost.
What certification does the machine carry?
Manufacturing is certified to ISO. No other certification is claimed for this unit.
Contact Us
Send us a video of your job site and we will show you how the machine works in that condition.
Email: woniuniu9527@163.com
WeChat / WhatsApp: +86 139 5387 9973