ZTW30-25 Loader-Excavator — 7.84-Ton 2-in-1 Backhoe Loader for Narrow Sites and Mixed Duty Cycles
The ZTW30-25 is a 7,840 kg wheeled backhoe loader that combines a 1.0 m³ front loading bucket with a 0.3 m³ rear digging bucket on one chassis. It is built for contractors who need to excavate, load and backfill on the same site without mobilising two machines — and for sites where a full-size excavator cannot enter. As a loader manufacturer with more than 20 years of export experience, we configure this unit for the actual ground conditions and duty cycle our buyers describe, not for a catalogue sheet.
Core Specifications at a Glance
Equipment weight: 7,840 kg — stable under full bucket load, still transportable on a standard low-bed trailer.
Front loading bucket: 1.0 m³ rated capacity, bucket width 2,300 mm.
Rear digging bucket: 0.3 m³, bucket width 750 mm, max. digging depth 4,340 mm, max. digging force 50 ±10% kN.
Engine: Cummins 75 kW, 12 V electrical system — parts and service available through the Cummins network in most export markets.
Min. turning radius: 4,300 mm; max. grade ability >30°; max. traction power 70–75 kN.
Certification: ISO certified manufacturing process.
How It Handles Difficult Working Conditions
Most backhoe loader complaints come from three situations: ground that is harder than the bucket is rated for, sites too tight for the machine to turn, and duty cycles that overheat the hydraulics. The ZTW30-25 is specified around those three problems.
Rocky and compacted ground. The rear bucket delivers 50 ±10% kN digging force and the front bucket more than 40 kN breakout force. On sites where a 5-ton excavator stalls, the operator can break the surface with the backhoe first, then switch to the 1.0 m³ loader bucket for removal — one operator, one pass, no second machine hire.
Narrow urban and municipal sites. A 4,300 mm minimum turning radius and 2,730 mm total width let the unit work between utility poles, fence lines and parked vehicles. The 180° backhoe rotating angle means the operator can dig a trench parallel to a wall and swing to either side without repositioning the chassis.
Slopes and haul roads. Grade ability above 30° and 70–75 kN traction power keep the machine productive on embankments and unpaved access roads where 4×2 utility loaders lose grip.
Deep utility trenches. 4,340 mm max. digging depth and 5,481 mm max. digging radius cover typical water, gas and telecom trench profiles without benching the sides.
Long shifts without refuelling stops. A 100 L diesel tank and 155 L hydraulic tank extend the working window between fills, which matters on sites where the fuel truck only arrives once a day.
Mixed-duty projects. Foundation pits, farm irrigation channels, landscaping and road maintenance all use the same attachment set, so the machine stays billable across seasons instead of sitting idle between specialist jobs.
20+ Years of Chinese Construction Machinery Export
We have shipped construction machinery to buyers in Africa, Southeast Asia, the Middle East, South America and Eastern Europe for more than two decades. That experience changes what we ship, not just how we sell it:
Configuration before order. Bucket size, tyre specification and attachment set are confirmed against the buyer's ground conditions and typical job, not left at the default export spec.
Spare parts planning. We quote a recommended wear-parts kit (bucket teeth, hydraulic hoses, filters) with the machine so the first service interval does not depend on an international parcel.
Documentation and shipping. Export packing, container loading plans and customs documents are handled in-house — the same team that quotes the machine follows the shipment to the port.
Factory price, direct. Because we quote as the loader manufacturer rather than through a trading layer, the factory price we send includes the configuration you specify and the export packing, with no intermediary margin added on top.
Buyers sourcing heavy equipment components alongside the machine — buckets, hydraulic cylinders, seals, filters — can consolidate them into the same container, which is usually the difference between a workable landed cost and an unworkable one on a single-unit order.
Where the ZTW30-25 Is Used
Foundation and basement pits — dig with the backhoe, load spoil with the front bucket, backfill with the same machine.
Municipal works — trenching and reinstatement between utility poles, kerbs and street furniture.
Farm irrigation — channel digging, dredging and bank repair in one pass.
Landscaping and tree transplanting — precise 0.3 m³ bucket control for root-ball work.
Road maintenance and small earthworks — shoulder repair, culvert work and site clearance.
Technical Specifications — ZTW30-25
| Item | Unit | Parameter |
|---|---|---|
| Backhoe bucket capacity 挖斗容积 | m³ | 0.3 |
| Rated loading bucket capacity 铲斗容积 | m³ | 1 |
| Rated lifting force 额定举升力 | kN | >25 |
| Equipment weight 整机重量 | kg | 7840 |
| Backhoe parameters 挖掘端参数 | Max. digging radius 最大挖掘半径 (mm) | 5481 |
| Max. dump height 最大挖掘高度 (mm) | 3737 | |
| Radius at max. dump height 最大卸载半径 (mm) | 1084 | |
| Max. digging radius at ground level 最大水平挖掘半径 (mm) | 5105 | |
| Digging bucket max. rotating angle 最大挖掘旋转角度 (°) | 180 | |
| Max. digging depth 最大挖掘深度 (mm) | 4340 | |
| Max. digging force 最大挖掘力 (kN) | 50±10% | |
| Loading parameters 装载端参数 | Max. dump height 最大卸载高度 (mm) | 2626 |
| Dump reach at max. dump height 最大卸载距离 (mm) | 726 | |
| Bucket draw back angle — transportation position 仰角 (°) | 43.5 | |
| Bucket draw back angle — ground position 收斗角 (°) | 36.5 | |
| Dump angle 倾倒角 (°) | 43.5 | |
| Digging depth 挖掘深度 (mm) | 191 | |
| Max. breakout force 最大掘起力 (kN) | >40 | |
| Max. grade ability 最大爬坡能力 | ° | >30 |
| Max. traction power 最大牵引力 | kN | 70–75 |
| Min. turning radius 最小转弯半径 | mm | 4300 |
| Wheelbase 轴距 | mm | 2320 |
| Front wheel track 前轮距 | mm | 1910 |
| Rear wheel track 后轮距 | mm | 1820 |
| Minimum ground clearance 最小离地间隙 | mm | 500 |
| Total length 长度 | mm | 7100 |
| Total height (cab) 高度（驾驶室） | mm | 2870 |
| Total width 宽度 | mm | 2730 |
| Bucket width 斗宽 | mm | 2300 |
| Digging end bucket width 挖斗宽度 | mm | 750 |
| Hydraulic tank 液压油箱 | L | 155 |
| Diesel tank 柴油箱 | L | 100 |
| Tire 轮胎 | 14-17.5 | 19.5L-24 |
| Voltage 电压 | V | 12 |
| Engine 发动机 | — | Cummins 75 kW |
Detailed Photos
Packaging & Shipping
Each ZTW30-25 ships in a 40HQ container. Two units fit per container, which is the configuration most buyers choose — the second machine shares the container cost, and the same shipment can carry a consolidated spare-parts order for heavy equipment components. Loading plans, lashing points and export packing are confirmed before the unit leaves the factory.
Request a Configuration Quote
Send us the ground conditions, the typical trench or pit dimensions and the site access width. We will reply with the matching bucket and tyre configuration and a factory price for your destination port.
WhatsApp: +86 139 5387 9973
Ask for: narrow-site operation video, container loading plan for two units, and the recommended spare-parts kit list.
