Operator Comfort in a 7,840 kg Backhoe Wheel Loader — Panoramic Cab, Hydraulic Steering, Cummins Power
Heavy machinery operation does not have to be uncomfortable. This backhoe wheel loader is built around the operator: a 2,870 mm panoramic cab, hydraulic steering and a fully adjustable seat, paired with a Cummins 75 kW engine and 4×4 drive. As a backhoe loader manufacturer with more than 20 years of Chinese construction machinery export experience, we configure each unit to the buyer's ground conditions rather than shipping a default export spec.
The comfort case is a productivity case. A machine that the operator can run for a full shift without fatigue, with a clear line to the rear bucket through the 180° digging swing, is the machine that keeps producing when the shift runs long.
🚗 Car-Grade Driving Experience
2,870 mm cab height. The operator sits high enough to see over the bucket and along the trench line, with a clear view of the rear arm through the full 180° swing.
Hydraulic steering. Low steering effort reduces operator fatigue across a long shift, which matters on sites where the machine is repositioning between trenches all day.
Fully adjustable seat. The seat adjusts to the operator rather than the operator adjusting to the seat — relevant where several drivers share one machine across shifts.
💺 Comfort Through the Shift
Fully enclosed cabin. Blocks dust and reduces noise exposure; heating and air conditioning are available as configured options.
Intuitive control layout. Proportional joystick control gives fine bucket movement for trench edges, root balls and utility crossings.
Ergonomic seating position. Reduces the twisting and reaching that shorten an operator's effective working window.
⚡ Power Meets Precision
Cummins 75 kW diesel engine. Low fuel consumption relative to output, with service reachable through the Cummins network in most export markets.
Trenching, loading, grading. 4,340 mm max. digging depth and 50 ±10% kN digging force cover water, gas and telecom trench profiles without benching the sides.
Reduced operator fatigue. A comfortable operator holds grade and keeps the bucket steady, which shows up in work quality more than in any single performance figure.


Taian, Shandong — Construction Machinery Cluster Advantage
Our production base sits in Taian, Shandong, the core cluster of Chinese construction machinery. That location shortens the supply chain for heavy equipment components: structural parts, hydraulic valves and precision steering assemblies come from nearby specialised factories, which compresses production cycles and keeps the factory price competitive for export buyers. Every ZTW30-25 is assembled with locally manufactured reinforced structural steel and hydraulic components, then checked against ISO-controlled production standards before it leaves the line.
System Configuration Details
Engine. Cummins 75 kW diesel, 12 V electrical system.
Hydraulics. 155 L hydraulic tank, sized for continuous digging and loading through a full shift.
Drivetrain. 4×4 drive, grade ability above 30°, 70–75 kN traction power.
Capacities. 100 L diesel, tyres 14-17.5 / 19.5L-24.


20+ Years of Chinese Construction Machinery Export
Two decades of export has shaped how we ship rather than just how we sell. Bucket size, tyre specification and attachment set are confirmed against the buyer's ground and typical job before the deposit. A 40HQ high-cube container carries two complete ZTW30-25 backhoe wheel loaders with optimised packing, which halves the per-unit freight cost. Documentation, certificate of origin, customs clearance and shipping coordination are handled in-house by the same team that quoted the unit.
Buyers comparing a Chinese front end loader against a European or Japanese brand frequently shortlist machines from SEM, Everun, Wolf or HZM alongside this unit; the deciding factors are usually parts availability, container loading cost and whether the configuration is fixed against the actual working conditions. Buyers adding heavy equipment components — buckets, cylinders, seals, filters — consolidate them into the same container, which on a single-unit order usually decides whether the landed cost works.


Comfort-Driven Solution for Difficult Working Conditions
The ZTW30-25 is specified around the conditions that stop lighter machines. 500 mm minimum ground clearance and a reinforced undercarriage keep it stable on muddy, rocky and uneven terrain. A 4,300 mm turning radius against a 2,730 mm body width lets it work inside narrow urban construction zones, residential streets and indoor industrial bays where a full-size excavator cannot enter. The fully enclosed cab keeps dust out and reduces noise exposure, so the operator can stay in the seat through a long trenching run rather than stopping to clear the working environment.
The 2,870 mm cab height gives the operator a clear view over the bucket and along the trench line through the 180° rear swing. On crowded sites that visibility is a safety factor as much as a comfort feature: buried lines, kerbs and site personnel stay in view through the working arc.
How Comfort Translates to Higher Productivity
Operator fatigue is a productivity variable that does not show up on a spec sheet. A machine that requires less steering effort, keeps dust out of the cab and holds the operator in a supported position is the machine that still has a steady hand on the joystick at hour eight. The practical result shows up in three places: fewer grading corrections on trench edges, fewer repositioning moves across the shift, and fewer operators rotating off the machine before the job is finished.
The same logic applies to the machine's working layout. Proportional hydraulic control lets a less experienced operator hold a steady grade without constant correction, and the panoramic cab keeps the rear bucket and trench edge in view through the full 180° swing. On mixed municipal and site work, that combination shortens the learning curve for a new operator and keeps output steady across long shifts.
Full Lifecycle Customer Support
Support runs from configuration to service. Customisation covers cabin upgrades, attachment configuration and company branding. The global after-sales network provides technical support, operator training and spare parts supply. Core components — engine, hydraulic pump and transmission — carry a 12-month or 2,000-hour warranty. Operation manuals, maintenance guides and video support ship with the unit, and technical enquiries receive a reply within 24 hours.
Key Technical Specifications
| Parameter | Unit | Value |
|---|---|---|
| Equipment weight | kg | 7840 |
| Engine model | — | Cummins 75 kW |
| Backhoe bucket capacity | m³ | 0.3 |
| Loader bucket capacity | m³ | 1.0 |
| Max. digging depth | mm | 4340 |
| Max. digging radius | mm | 5481 |
| Max. digging force | kN | 50 ±10% |
| Digging bucket max. rotating angle | ° | 180 |
| Cab height | mm | 2870 |
| Min. turning radius | mm | 4300 |
| Ground clearance | mm | 500 |
| Hydraulic oil tank | L | 155 |
| Overall dimensions (L×W×H) | mm | 7100 × 2730 × 2870 |
| Certification | — | ISO |
Manufacturing process certified to ISO; no other certification is claimed for this unit.
Frequently Asked Questions
Are you a manufacturer or a trading company?
We are a backhoe loader manufacturer with our own production base in Taian, Shandong, China, and more than 20 years of manufacturing and export experience.
What is your container loading plan?
One 40HC high-cube container carries two complete ZTW30-25 backhoe wheel loaders with optimised packing, which halves the per-unit freight cost.
What warranty do you provide?
12 months or 2,000 operating hours on core components: engine, hydraulic system and transmission.
Can you customize the cabin and attachments?
Yes. Cabin upgrades (air conditioning, heating, sound insulation), attachments (pallet forks, grapples, snow blades) and company branding are configured before the deposit.
How do I get a wheel loader price for my destination?
Send the destination port and the configuration you need. The reply is a factory price for that specification, with export packing included and no intermediary margin added.
What is your production and delivery time?
Standard production time is 30 days after deposit. Shipping takes 25–45 days depending on the destination port.
Contact Us for a Factory Price Quote
WhatsApp / WeChat: +86 139 5387 9973
Email: woniuniu9527@163.com
Factory address: Taian City, Shandong Province, China — National Construction Machinery Cluster