ZTW30-25 Backhoe Loader — The Cab That Beats My Sedan
7.84 t Weight · 75 kW CUMMINS Engine · 50 kN Digging Force
Driving a ZT loader? Let's just say the cab is a “first-class cabin” on the job site. AC + heater + sunroof = cozy in any weather; crystal-clear backup camera means no more neck strain; and with a 4.3 m turning radius, you can turn nearly blindfolded.

20+ Years Export Experience, Engineered for Two-Machine-in-One Efficiency
As a professional loader manufacturer with more than 20 years of export experience, Taian Zhengtai (ZT MACHINE) has delivered backhoe loaders to construction, municipal, and utility contractors in over 60 countries. The ZTW30-25 was designed for one specific brief: replace two separate machines — an excavator and a wheel loader — with a single, road-legal unit that ships two units per 40HQ container.
Productivity is measurable on both ends. The front loader delivers over 40 kN breakout force with a 1 m³ bucket and 2,626 mm dump height — fast truck loading. The rear backhoe delivers 50 kN digging force with a 0.3 m³ bucket, 5,481 mm max digging radius, and 4,340 mm max digging depth — basement and utility trenching without repositioning. Total cycle time on the loader end is under 12 seconds.
Operator comfort was engineered as a productivity feature, not a luxury. AC + heater + sunroof keep the cab comfortable in any weather. A crystal-clear backup camera and one-touch 2WD/4WD switch allow the operator to switch modes in 30 seconds without leaving the seat. A 4.3 m turning radius and 500 mm ground clearance let the ZTW30-25 navigate tight urban plots and muddy jobsites with confidence.
Every structural element — from the reinforced loading arms to the wet-brake axle — is built from verified heavy equipment components rated for continuous duty. Our factory price direct-supply model removes intermediaries, delivering best value to contractors, rental fleets, and government infrastructure buyers. We support OEM branding, custom paint, and third-party inspection (SGS / BV) at any stage.
Spare parts — wet brake components, hydraulic hoses, filters, and tyres — ship in wooden boxes within 24 hours of an urgent request. Why do contractors choose the ZTW30-25? Because it solves four operational problems at once: the capital cost of buying two machines, the transport cost of moving them, the space constraint of tight urban sites, and the downtime of switching equipment between digging and loading tasks. Backed by 20+ years of export experience, the ZTW30-25 is engineered for the realities of modern construction.
Comfort Maxed Out
AC + heater + sunroof: Cozy in any weather
Crystal-clear backup camera: No more neck strain
4.3 m turning radius: With the camera, you can turn nearly blindfolded
Effortless Operation
2WD/4WD one-touch switch: Pavement today, mud tomorrow? Just push a button
No leaving the seat: Switch modes in 30 seconds
No more back pain: Forget calling for help in mud pits
Operator Upgrade
From only handling easy jobs to conquering mud, slopes, and tight spaces. Bosses will be impressed, and your paycheck shows it. This isn't driving heavy machinery — it's piloting a “Transformer” on a working vacation.
💰 Money Talks — This Machine Earns While It Works
ZT's smart 4WD isn't for show — it's a profit-generating machine.
Time Saved = Money Earned
Works rain or shine, never “weathers off”
Others get stuck, you haul 3 more loads
Gentle on turf, clients pay faster
Fuel Savings Buy a Car
2WD for transport cuts fuel by 30%
Less engine wear, major repairs delayed 3 years
Higher resale value beats competitors
Long-Term Smart Investment
Parts last twice as long, save $7k/year on maintenance
Finish early get bonuses, 20+ more projects/year
Pays for itself in 3 years, pure profit after
This isn't equipment — it's a 24/7 “iron partner” that pays you back.
📊 Product Parameters
| Item | Unit | Parameter | |||
| Backhoe bucket capacity | m3 | 0.3 | |||
| Rated loading bucket capacity | m3 | 1 | |||
| Rated Lifting Force | KN | >25 | |||
| Equipment weight | kg | 7840 | |||
| Backhoe parameter | Max. digging radius | mm | 5481 | ||
| Max. dump height | mm | 3737 | |||
| Radius at the max. dump height | mm | 1084 | |||
| Max. digging radius at ground level | mm | 5105 | |||
| Digging buckets max. rotating angle | º | 180 | |||
| Max. digging depth | mm | 4340 | |||
| Max. digging force | KN | 50±10% | |||
| Loading parameter | Max. dump height | mm | 2626 | ||
| Dump reach at max. dump height | mm | 726 | |||
| Bucket draw back angle | Transportation position | º | 43.5 | ||
| Ground position | º | 36.5 | |||
| Dump angle | º | 43.5 | |||
| Digging depth | mm | 191 | |||
| Max. breakout force | KN | >40 | |||
| Max. grade ability | º | >30 | |||
| Max. traction power | KN | 70-75 | |||
| Min. turning radius | mm | 4300 | |||
| Wheelbase | mm | 2320 | |||
| Front wheel track | mm | 1910 | |||
| Rear wheel track | mm | 1820 | |||
| Minimum ground clearance | mm | 500 | |||
| Total length | mm | 7100 | |||
| Total height (Cab) | mm | 2870 | |||
| Total Width | mm | 2730 | |||
| Bucket width | mm | 2300 | |||
| Digging end bucket width | mm | 750 | |||
| Hydraulic tank | L | 155 | |||
| Diesel tank | L | 100 | |||
| Tire | 14-17.5 | 19.5L-24 | |||
| Voltage | V | 12 | |||
| Engine | cummins 75kw | ||||
📸 Detailed Photos




📝 Summary
The Multi-functional Wheeled Excavator Loader represents cutting-edge equipment design, delivering an optimal combination of flexibility, resilience, and output. It reduces the necessity for several specialized machines, offering an economical, comprehensive solution for companies aiming to boost productivity while maintaining versatility. Excellent for contemporary work environments, it establishes a new benchmark for adaptable heavy equipment.
📦 Packaging & Shipping
Packing & Delivery — 40HC container: 2 units can be installed
Standard packing: the machine body is without packing, but will be well fastened and fixed in the container by wire rope.
Spare parts or wearing parts will be packed in wooden box or paper carton.
Standard shipping method is by container.



❓ Frequently Asked Questions
Q1: Are you a factory or a trading company?
We are a loader manufacturer with over 20 years of production and export experience. Our factory is located in Tai'an, Shandong, with in-house R&D, welding, painting, and final assembly. All equipment is self-manufactured — no outsourcing.
Q2: How do you ensure quality before export?
Every ZTW30-25 undergoes a continuous load test covering the CUMMINS engine, hydraulic system, both loading and backhoe ends, and wet brake axle. We support third-party inspections (SGS / BV) and provide full test reports along with CE / ISO certificates.
Q3: What are the packaging and shipping methods?
Standard 40HC container holds 2 units. The machine body is anchored with wire rope; spare parts are packed separately in wooden boxes or paper cartons. We coordinate the entire logistics process from factory to destination port.
Q4: How is after-sales support and spare parts supply?
We maintain a large stock of consumable parts (wet brake components, filters, hydraulic hoses, tyres). Emergency orders can be dispatched within 24 hours. We also offer remote diagnostics, video guidance, and on-site service in selected regions.
Q5: Can you provide OEM / customisation services?
Absolutely. We support custom branding, colour options, and attachment selection (buckets, forks, breakers, augers, etc.). Just share your requirements and we'll provide a tailored solution.