🚜 Heavy-Duty Industrial Backhoe Loader — Dual-Mode Digging and Loading on One Chassis
A 7,840 kg wheeled backhoe loader with a 1 m³ front loading bucket and a 0.3 m³ rear digging bucket on the same chassis. One operator digs, loads and backfills without a second machine on site. As a loader manufacturer with more than 20 years of Chinese construction machinery export experience, we match each unit's bucket, tyre and attachment set to the buyer's ground conditions before the order is fixed.
💰 Cost-Crushing Mode
Dual functions in one machine. Front-end loading and rear-end digging share one engine, one hydraulic circuit and one set of wear parts, so a site that needs both does not pay for two units or two operators.
Fuel and service cost. One Cummins 75 kW engine to fuel and service instead of two. A 100 L diesel tank and 155 L hydraulic tank keep the machine working through a shift where the fuel truck only comes once a day.
🐒 Narrow-Site Ninja Mode
Compact body, small turning circle. 2,730 mm total width and 4,300 mm minimum turning radius — workable in narrow alleys, orchard rows and tunnel approaches where a full-size excavator cannot turn.
Two buckets, three jobs. 0.3 m³ digging bucket at the rear, 1 m³ loading bucket at the front. Digging, loading and backfilling run off the same attachment set without a machine swap.
💪 Tough-Battle King Mode
Suspended seat and panoramic cab. The operator sits with a clear line to the rear bucket through the full 180° digging swing, so trench edges and buried lines stay visible.
Pilot-operated hydraulic control. Proportional joystick control gives fine bucket movement for trench edges, root balls and utility crossings, which shortens the learning curve for a new operator.
Product Advantages
Extended Component Life
Wear parts — bucket teeth, cutting edges, hydraulic hoses — are quoted as a kit with the machine, so the first service interval does not depend on an international parcel.
Operational Reliability
A Cummins 75 kW engine with service reachable through the Cummins network in most export markets. We confirm the nearest service point for your destination before the order is confirmed.
Built for Rough Ground
Grade ability above 30°, 70–75 kN traction power and 500 mm ground clearance. The machine keeps working on embankments, rutted haul roads and unpaved site access where a 4×2 utility loader loses grip.
Corrosion and Impact Protection
Coated structural steel and cushioned critical components. Manufacturing is certified to ISO; no other certification is claimed for this unit.
Product Details
This industrial-grade loader is built for sites where the machine has to keep producing: rocky and compacted ground, narrow municipal trenches, and long shifts where a breakdown costs a day. The rear bucket delivers 50 ±10% kN digging force and the front bucket more than 40 kN breakout force, so the operator can break hard surface with the backhoe and move spoil with the loader bucket in one pass.
Depth and reach cover real utility work rather than catalogue figures: 4,340 mm max. digging depth, 5,481 mm max. digging radius and 5,105 mm max. digging radius at ground level. Typical water, gas and telecom trenches run well inside those limits, so the sides do not need benching.
Twenty years of exporting Chinese construction machinery changes how the unit ships, not just how it is described. Bucket size, tyre specification and attachment set are confirmed against the buyer's ground and typical job. Export packing, container loading plans and customs documents are handled by the same team that quoted the machine. Buyers adding heavy equipment components — cylinders, seals, filters, spare buckets — consolidate them into the same container, which on a single-unit order usually decides whether the landed cost works.
Technical Specifications
| Item | Unit | Parameter |
|---|---|---|
| Backhoe bucket capacity 挖斗容积 | m³ | 0.3 |
| Rated loading bucket capacity 铲斗容积 | m³ | 1 |
| Rated lifting force 额定举升力 | kN | >25 |
| Equipment weight 整机重量 | kg | 7840 |
| Backhoe parameters 挖掘端参数 | Max. digging radius 最大挖掘半径 (mm) | 5481 |
| Max. dump height 最大挖掘高度 (mm) | 3737 | |
| Radius at max. dump height 最大卸载半径 (mm) | 1084 | |
| Max. digging radius at ground level 最大水平挖掘半径 (mm) | 5105 | |
| Digging bucket max. rotating angle 最大挖掘旋转角度 (°) | 180 | |
| Max. digging depth 最大挖掘深度 (mm) | 4340 | |
| Max. digging force 最大挖掘力 (kN) | 50±10% | |
| Loading parameters 装载端参数 | Max. dump height 最大卸载高度 (mm) | 2626 |
| Dump reach at max. dump height 最大卸载距离 (mm) | 726 | |
| Bucket draw back angle — transportation position 仰角 (°) | 43.5 | |
| Bucket draw back angle — ground position 收斗角 (°) | 36.5 | |
| Dump angle 倾倒角 (°) | 43.5 | |
| Digging depth 挖掘深度 (mm) | 191 | |
| Max. breakout force 最大掘起力 (kN) | >40 | |
| Max. grade ability 最大爬坡能力 | ° | >30 |
| Max. traction power 最大牵引力 | kN | 70–75 |
| Min. turning radius 最小转弯半径 | mm | 4300 |
| Wheelbase 轴距 | mm | 2320 |
| Front wheel track 前轮距 | mm | 1910 |
| Rear wheel track 后轮距 | mm | 1820 |
| Minimum ground clearance 最小离地间隙 | mm | 500 |
| Total length 长度 | mm | 7100 |
| Total height (cab) 高度（驾驶室） | mm | 2870 |
| Total width 宽度 | mm | 2730 |
| Bucket width 斗宽 | mm | 2300 |
| Digging end bucket width 挖斗宽度 | mm | 750 |
| Hydraulic tank 液压油箱 | L | 155 |
| Diesel tank 柴油箱 | L | 100 |
| Tire 轮胎 | 14-17.5 | 19.5L-24 |
| Voltage 电压 | V | 12 |
| Engine 发动机 | — | Cummins 75 kW |
Frequently Asked Questions
Can the machine be configured differently from the standard export spec?
Yes. Bucket, tyre and attachment choices are settled before the deposit, based on the ground you work and the job you run most often. Send those two details and we return a written configuration list for approval.
What happens after I place the order?
You receive the configuration list, a production schedule and the container loading plan for sign-off. The same team that quoted the unit handles export packing and customs documents through to the port.
Are spare parts supplied with the first order?
A recommended wear-parts kit is quoted alongside the machine so the first service interval does not wait on an international parcel. Buyers can add further components to the same shipment.
What documentation ships with the machine?
Operation and maintenance manual, parts catalogue, and the export documentation set — packing list, commercial invoice and certificate of origin. Manufacturing is certified to ISO; no other certification is claimed for this unit.
How do I get a price for my destination?
Send the destination port and the configuration you need. The reply is a factory price for that specification, with export packing included and no intermediary margin added.
🎁 Talk to a Real Person
Send ground conditions, typical trench or pit dimensions, and site access width. A person answers — not an autoresponder.
WeChat / WhatsApp: +86 139 5387 9973
