🚜 ZTW30-25 Backhoe Loader — The Dual-Mode All-Round Machine for Construction Sites
One machine with two functions: a 1 m³ front loading bucket and a 0.3 m³ rear digging bucket on the same 7,840 kg chassis. It digs, loads, lifts and backfills without a second unit on site — the efficiency case for a contractor running mixed work.
A 4,300 mm minimum turning radius against a 2,730 mm body width is what makes narrow-site work practical: alleys, orchard rows, municipal trenches between poles, and tunnel approaches a full-size excavator cannot enter.
💪 Three Core Capabilities
Multi-functional in one chassis. Front loading and rear excavation run off the same engine and hydraulic circuit, so the machine covers digging, loading and material handling on one site instead of three separate hires.
4×4 drive with terrain-adaptive operation. Four-wheel drive for traction on unpaved haul roads and embankments; grade ability above 30° and 70–75 kN traction power keep it working where a 4×2 utility loader loses grip.
Operator cabin built for long shifts. Spacious cab with shock absorption, low-noise layout and a fully adjustable seat. The operator sits with a clear line to the rear bucket through the full 180° digging swing, so trench edges and buried lines stay visible.
🛠️ Six Application Scenarios
Municipal engineering — trenching and reinstatement between utility poles and kerbs, including night work.
Farm work — orchard clearance, channel digging and dredging.
Landscaping — precision bucket work for root balls and grade shaping.
Building construction — foundation digging and material handling on the same pass.
Pipeline maintenance — controlled trench width and depth with the 0.3 m³ bucket.
Road maintenance — shoulder repair, culvert work and site clearance.
Configuration is set to the job, not left at default export spec: bucket size, tyre specification and attachment set are confirmed against the buyer's ground conditions before the order is fixed.
Basic Info
| Model NO. | ZTW30-25 |
| Rated Load | 1–2.5 t |
| Transmission | Hydraulic-mechanical |
| Load and Unload Mode | Front loading and back excavation |
| Walking Mode | Wheeled, 4×4,4×2 |
| Type | Small loader / backhoe loader |
| Engine | Cummins 75 kW (Xinchai 60 kW optional) |
| Operating Weight | 7,840 kg |
| Backhoe Bucket Capacity | 0.3 m³ |
| Rated Loading Bucket Capacity | 1 m³ |
| Rated Lifting Force | >25 kN |
| Max. Digging Radius | 5,481 mm |
| Max. Digging Depth | 4,340 mm |
| Max. Digging Force | 50 ±10% kN |
| Max. Dump Height (loading) | 2,626 mm |
| Min. Turning Radius | 4,300 mm |
| Dimensions (L×W×H) | 7,100 × 2,730 × 2,870 mm |
| Transport Package | Nude, wire-rope secured in container |
| Trademark | ZTMACHINE |
| Origin | China |
| HS Code | 8429590000 |
| Production Capacity | 30 units / month |
| Certification | ISO |
Product Parameters
30 Days Fast Delivery · Custom Paint & Logo Accepted
| Item | Unit | Parameter |
|---|---|---|
| General Specifications | ||
| Backhoe bucket capacity 挖斗容积 | m³ | 0.3 |
| Rated loading bucket capacity 铲斗容积 | m³ | 1 |
| Rated lifting force 额定举升力 | kN | >25 |
| Equipment weight 整机重量 | kg | 7840 |
| Backhoe Parameters 挖掘端参数 | ||
| Max. digging radius 最大挖掘半径 | mm | 5481 |
| Max. dump height 最大挖掘高度 | mm | 3737 |
| Radius at max. dump height 最大卸载半径 | mm | 1084 |
| Max. digging radius at ground level 最大水平挖掘半径 | mm | 5105 |
| Digging bucket max. rotating angle 最大挖掘旋转角度 | ° | 180 |
| Max. digging depth 最大挖掘深度 | mm | 4340 |
| Max. digging force 最大挖掘力 | kN | 50±10% |
| Loading Parameters 装载端参数 | ||
| Max. dump height 最大卸载高度 | mm | 2626 |
| Dump reach at max. dump height 最大卸载距离 | mm | 726 |
| Bucket draw back angle — transportation position 仰角 | ° | 43.5 |
| Bucket draw back angle — ground position 收斗角 | ° | 36.5 |
| Dump angle 倾倒角 | ° | 43.5 |
| Digging depth 挖掘深度 | mm | 191 |
| Max. breakout force 最大掘起力 | kN | >40 |
| Performance Specifications 性能参数 | ||
| Max. grade ability 最大爬坡能力 | ° | >30 |
| Max. traction power 最大牵引力 | kN | 70–75 |
| Min. turning radius 最小转弯半径 | mm | 4300 |
| Dimensions 尺寸 | ||
| Wheelbase 轴距 | mm | 2320 |
| Front wheel track 前轮距 | mm | 1910 |
| Rear wheel track 后轮距 | mm | 1820 |
| Minimum ground clearance 最小离地间隙 | mm | 500 |
| Total length 长度 | mm | 7100 |
| Total height (cab) 高度(驾驶室) | mm | 2870 |
| Total width 宽度 | mm | 2730 |
| Bucket width 斗宽 | mm | 2300 |
| Digging end bucket width 挖斗宽度 | mm | 750 |
| Fluid Systems & Power 油液与电气 | ||
| Hydraulic tank 液压油箱 | L | 155 |
| Diesel tank 柴油箱 | L | 100 |
| Tire 轮胎 | 14-17.5 | 19.5L-24 |
| Voltage 电压 | V | 12 |
| Engine 发动机 | — | Cummins 75 kW (Xinchai 60 kW optional) |
Detailed Photos






ZTW30-25 Backhoe Loader Key Features
| Category | Details |
|---|---|
| General Specifications | |
| Weight | 7,840 kg |
| Dimensions (L×W×H) | 7,100 × 2,730 × 2,870 mm |
| Backhoe bucket capacity | 0.3 m³ |
| Loading bucket capacity | 1 m³ |
| Power & Drivetrain | |
| Engine options | Cummins 75 kW (low fuel consumption, low noise, high power); Xinchai 60 kW as an alternative power system |
| Drivetrain | 4×4 wheel drive for off-road traction |
| Transmission | Hydraulic torque converter for smooth power delivery |
| Operator Comfort | |
| Cab design | Spacious ergonomic cab with shock absorption; low-noise layout for reduced operator fatigue |
| Seating | Fully adjustable seat for long shifts |
| Monitoring & Control | |
| Instrument panel | Real-time display of water temperature, oil temperature and electrical current |
| Functionality & Versatility | |
| Capabilities | Covers the working functions of a mini excavator plus a loader: digging, loading and material handling on one chassis |
| Performance Advantages | |
| Efficiency | Optimised fuel efficiency for cost-effective operation; high power output for heavy-duty applications |
| Durability | Rugged construction for reliable performance in harsh environments |
Manufacturing process certified to ISO.
Packaging & Shipping
Container 40HC — 2 units can be installed.
Standard packing. The machine body ships without packing but is fastened and fixed inside the container with wire rope.
Spare and wearing parts. Packed in wooden boxes or paper cartons, separate from the machine.
Shipping method. Standard shipping is by container.
Request a Configuration Quote
Send ground conditions, typical trench or pit dimensions, and site access width. We reply with the matching bucket and tyre configuration and a factory price for your destination port.
WhatsApp: +86 139 5387 9973
Facebook ID: zhengtai.taian