🚜 Construction Site Transformer PRO — One Machine for Digging and Loading
A 7,840 kg wheeled loader-excavator that carries a 1 m³ front loading bucket and a 0.3 m³ rear digging bucket on one chassis. Contractors use it to dig, load and backfill on the same site without mobilising a second machine. As a loader manufacturer with more than 20 years of export experience, we configure each unit to the buyer's ground conditions and duty cycle rather than shipping a default export spec.
💎 Why Contractors Order This Unit
Dual functions, one chassis. The front loading bucket (1 m³, 2,300 mm wide) and the rear digging bucket (0.3 m³, 750 mm wide) work off the same machine, so a site that needs both digging and loading does not pay for two units or two operators.
Quick-change interface. Attachments swap at the coupling point instead of being rebuilt on site, which keeps the machine on the job rather than in the yard.
Panoramic digging visibility. The operator sits with a clear line to the rear bucket through the 180° digging swing, so trench edges and utility lines stay visible through the full arc.
Mini turning radius. 4,300 mm minimum turning radius against a 2,730 mm body width — tight enough for alleys, yard corners and municipal work between poles and kerbs.
Low-noise suspended seat cockpit. The cab is laid out for long shifts with joystick control and a suspended seat, so operator fatigue does not become the limit on daily output.
⚡ Return on Investment
Lower maintenance cost. One engine, one hydraulic circuit and one set of wear parts to service instead of two machines — the saving shows up in the service schedule, not just the purchase price.
Faster payback. Because the unit covers both digging and loading, it can be billed on more job types per season than a single-function machine.
More job types per year. Municipal, agricultural and infrastructure work all use the same attachment set, so the machine stays billable across seasons instead of sitting idle between specialist jobs.
🎮 Operator-Focused Technology
Intelligent hydraulic system. Proportional control lets a less experienced operator hold a steady trench grade without constant correction.
180° digging swing, no blind zone. The rear bucket travels a full 180°, so the operator can place spoil on either side of the trench without repositioning the chassis.
Fingertip precision. Joystick control gives fine bucket movement for trench edges, root balls and utility crossings where a coarse bucket would do damage.
How It Handles Difficult Working Conditions
Rocky and compacted ground. 50 ±10% kN digging force at the rear bucket and >40 kN breakout force at the front. The operator breaks the surface with the backhoe, then moves spoil with the 1 m³ loader bucket — one machine, one pass.
Slopes and unpaved haul roads. Grade ability above 30° and 70–75 kN traction power keep the machine working where 4×2 utility loaders lose grip. 500 mm ground clearance protects the underside on rutted ground.
Deep utility trenches. 4,340 mm max. digging depth and 5,481 mm max. digging radius cover water, gas and telecom trench profiles without benching the sides.
Long shifts without refuelling stops. 100 L diesel and 155 L hydraulic capacity extend the working window between fills, which matters where the fuel truck arrives once a day.
Two decades of exporting Chinese construction machinery means these configurations are settled before the deposit: bucket size, tyre spec and attachment set are matched to the buyer's ground and typical job. Buyers adding heavy equipment components — buckets, cylinders, seals, filters — consolidate them into the same container, which on a single-unit order usually decides whether the landed cost works.
🌍 Nine Application Scenarios
Construction — foundation digging and material handling on the same pass.
Agriculture — orchard clearance, channel digging and dredging.
Municipal projects — night trenching and reinstatement between utility poles and kerbs.
Mining — narrow tunnel clean-up and material transfer.
Pipeline laying — controlled trench width and depth with the 0.3 m³ bucket.
Emergency rescue — flood debris removal and access clearing.
Forestry — debris removal alongside trimming work.
Ranch maintenance — manure and bedding clean-out in one pass.
Snow removal — clearing and stacking in the same movement.
Technical Specifications
| Item | Unit | Parameter |
|---|---|---|
| Backhoe bucket capacity 挖斗容积 | m³ | 0.3 |
| Rated loading bucket capacity 铲斗容积 | m³ | 1 |
| Rated lifting force 额定举升力 | kN | >25 |
| Equipment weight 整机重量 | kg | 7840 |
| Backhoe parameters 挖掘端参数 | Max. digging radius 最大挖掘半径 (mm) | 5481 |
| Max. dump height 最大挖掘高度 (mm) | 3737 | |
| Radius at max. dump height 最大卸载半径 (mm) | 1084 | |
| Max. digging radius at ground level 最大水平挖掘半径 (mm) | 5105 | |
| Digging bucket max. rotating angle 最大挖掘旋转角度 (°) | 180 | |
| Max. digging depth 最大挖掘深度 (mm) | 4340 | |
| Max. digging force 最大挖掘力 (kN) | 50±10% | |
| Loading parameters 装载端参数 | Max. dump height 最大卸载高度 (mm) | 2626 |
| Dump reach at max. dump height 最大卸载距离 (mm) | 726 | |
| Bucket draw back angle — transportation position 仰角 (°) | 43.5 | |
| Bucket draw back angle — ground position 收斗角 (°) | 36.5 | |
| Dump angle 倾倒角 (°) | 43.5 | |
| Digging depth 挖掘深度 (mm) | 191 | |
| Max. breakout force 最大掘起力 (kN) | >40 | |
| Max. grade ability 最大爬坡能力 | ° | >30 |
| Max. traction power 最大牵引力 | kN | 70–75 |
| Min. turning radius 最小转弯半径 | mm | 4300 |
| Wheelbase 轴距 | mm | 2320 |
| Front wheel track 前轮距 | mm | 1910 |
| Rear wheel track 后轮距 | mm | 1820 |
| Minimum ground clearance 最小离地间隙 | mm | 500 |
| Total length 长度 | mm | 7100 |
| Total height (cab) 高度（驾驶室） | mm | 2870 |
| Total width 宽度 | mm | 2730 |
| Bucket width 斗宽 | mm | 2300 |
| Digging end bucket width 挖斗宽度 | mm | 750 |
| Hydraulic tank 液压油箱 | L | 155 |
| Diesel tank 柴油箱 | L | 100 |
| Tire 轮胎 | 14-17.5 | 19.5L-24 |
| Voltage 电压 | V | 12 |
| Engine 发动机 | — | Cummins 75 kW |
Manufacturing process certified to ISO.
Frequently Asked Questions
Can the machine be configured differently from the standard export spec?
Yes. Bucket, tyre and attachment choices are settled before the deposit, based on the ground you work and the job you run most often. Send those two details and we return a written configuration list for your approval.
What happens after I place the order?
You receive the configuration list, a production schedule, and the container loading plan for sign-off. The same team that quoted the unit handles export packing and customs documents through to the port.
Are spare parts supplied with the first order?
A recommended wear-parts kit is quoted alongside the machine so the first service interval does not wait on an international parcel. Buyers can add further components to the same shipment.
What documentation ships with the machine?
Operation and maintenance manual, parts catalogue, and the export documentation set — packing list, commercial invoice and certificate of origin. Manufacturing is certified to ISO; no other certification is claimed for this unit.
How do I get a price for my destination?
Send the destination port and the configuration you need. The reply is a factory price for that specification, with export packing included and no intermediary margin added.
Detailed Photos
🚢 Packaging & Shipping
📦 Packaging standards
Secure fixing. The main machine is secured in the container with steel wire ropes, ensuring stability during transport.
Parts packaging. Spare parts and consumables are packed in wooden boxes or cartons, separate from the machine.
Shockproof design. Critical components are protected with cushioning material to absorb impact in transit.
🚢 Loading
40HC container: two units per container, at up to 95% space utilisation.
Professional fixing: ISO-standard lashing technology that holds under sea conditions.
Request a Configuration Quote
Send ground conditions, typical trench or pit dimensions, and site access width. WhatsApp: +86 139 5387 9973
