🚜 Industrial Powerhouse — Cummins-Powered Backhoe Loader
A 7,840 kg wheeled backhoe loader with a 1 m³ front loading bucket and a 0.3 m³ rear digging bucket on one chassis, powered by a Cummins 75 kW diesel engine. Built for contractors who excavate, load and backfill on the same site without mobilising a second machine.
🔥 Core Advantages
Cummins power. 75 kW diesel engine with high torque and low fuel consumption for demanding sites.
Dual-bucket balance. 0.3 m³ precision digging bucket at the rear, 1 m³ loading bucket at the front, both on one hydraulic circuit.
Tight-space agility. 4,300 mm minimum turning radius against a 2,730 mm body width, workable in alleys and confined industrial yards.
High-performance hydraulics. 155 L hydraulic tank sustains responsive operation through long digging and loading cycles.
All-terrain capability. 500 mm ground clearance keeps the underside clear on rough, muddy and uneven surfaces.
Auto counterweight. Balance adjusts with load weight, which matters when lifting with the front bucket near the machine's rated limit.
Certified manufacturing. Production certified to ISO.
🏗️ 4 Key Industrial Applications
Foundation excavation and backfilling
Pipeline and utility trenching
On-site material handling
Industrial yard maintenance
⚙️ Performance Highlights
Engineered for heavy-duty cycle operations
Panoramic cabin with a clear line to the rear bucket through the 180° digging swing
Reinforced undercarriage for long service life
Low-maintenance hydraulic and powertrain design
🔧 Customization & Support
Optional attachments for specialised tasks, confirmed with the order
Global after-sales service network
Manufacturing certified to ISO
📥 Get Your Tailored Solution
Request the product catalogue and configuration guide
Schedule a one-on-one engineering consultation
Product Details
This backhoe loader combines an excavator and a front loader in one machine. A Cummins 75 kW diesel engine drives both working ends, so the operator shifts from excavation to loading without leaving the seat or bringing in a second unit.
The hydraulic system runs a 155 L reservoir and delivers up to 50 kN digging force. With 4,340 mm maximum digging depth and 3,737 mm maximum dump height, it covers foundation pits, utility trenches and material stockpiles. At 7,100 × 2,730 × 2,870 mm with a 4,300 mm turning radius, it works in yards and alleys where larger equipment cannot enter.
Taian, Shandong — Construction Machinery Cluster Advantage
Our production base sits in Taian, Shandong, the core cluster of Chinese construction machinery. That location shortens the supply chain for heavy equipment components: structural parts, hydraulic valves and chassis assemblies come from nearby specialised factories, which compresses production cycles and keeps the factory price competitive for export buyers. Every ZTW30-25 is assembled with locally manufactured structural parts and a reinforced chassis, then checked against ISO-controlled production standards before it leaves the line.
20+ Years of Export Experience
More than two decades of Chinese construction machinery export has shaped how we ship rather than just how we sell. Buyers in South America, Southeast Asia, Africa and Oceania receive units configured against their ground conditions: bucket size, tyre specification and attachment set are confirmed before the deposit. A 40HQ high-cube container carries two complete ZTW30-25 backhoe loaders with optimised packing, which halves the per-unit freight cost. Our export team handles documentation, customs clearance and shipping coordination in-house.
Complex Working Conditions
The ZTW30-25 is specified around the conditions that stop lighter machines. 500 mm minimum ground clearance and a reinforced undercarriage keep it stable on muddy, rocky and uneven terrain. A 4,300 mm turning radius against a 2,730 mm body width lets it work inside narrow urban construction zones, residential streets and indoor industrial bays. The 155 L hydraulic system sustains continuous digging, loading and material handling through long shifts rather than fading after the first hour.
Performance and Operating Efficiency
The 0.3 m³ backhoe bucket and 1 m³ loading bucket let one operator switch between excavation and loading without a machine swap. 50 kN digging force and 4,340 mm maximum digging depth handle hard soil, clay and gravel. The auto-counterweight system adjusts balance with load weight, which matters when the front bucket is near its rated capacity. A low-maintenance hydraulic circuit and powertrain reduce downtime, and the panoramic cab gives the operator the visibility that keeps daily output steady across long shifts.
Full Lifecycle Support
Support runs from configuration to service. Customisation covers logo printing, colour matching and attachment configuration. The global after-sales network provides technical support, operator training and spare parts supply. Core components — engine, hydraulic pump and transmission — carry a 12-month or 2,000-hour warranty. Operation manuals, maintenance guides and video support ship with the unit, and the online service line responds to technical enquiries within 24 hours.
Key Technical Specifications
| Parameter | Unit | Value |
|---|---|---|
| Equipment weight | kg | 7840 |
| Engine power | kW | 75 (Cummins) |
| Backhoe bucket capacity | m³ | 0.3 |
| Loader bucket capacity | m³ | 1.0 |
| Max. digging depth | mm | 4340 |
| Max. digging force | kN | 50 |
| Min. turning radius | mm | 4300 |
| Hydraulic oil tank | L | 155 |
| Ground clearance | mm | 500 |
| Overall dimensions (L×W×H) | mm | 7100 × 2730 × 2870 |
| Certification | — | ISO |
Manufacturing process certified to ISO; no other certification is claimed for this unit.
Frequently Asked Questions
Are you a factory or a trading company?
We are a backhoe loader manufacturer with our own production base in Taian, Shandong, China, and more than 20 years of manufacturing and export experience.
What is your container loading plan?
One 40HC container loads two ZTW30-25 backhoe loaders with optimised packaging, which halves the per-unit freight cost.
How long is the warranty?
12 months or 2,000 operating hours on core components: engine, hydraulic system and transmission.
What is your production and delivery time?
Standard production time is 30 days after deposit. Shipping takes 25–45 days depending on the destination port.
Can the machine be configured for my ground conditions?
Yes. Bucket, tyre and attachment choices are settled before the deposit. Send the ground type and the typical job and we return a written configuration list for approval.
