Advanced Smart Backhoe Loader with Precision Bucket Control

Experience the next generation of earthmoving with our Advanced Smart Backhoe Loader. Featuring precision bucket control and a 75kW Cummins engine, this machine delivers >25KN lifting and 50KN digging force for maximum jobsite efficiency. It perfectly bridges the gap between heavy-duty power and the agility of a Small Front Loader.

  • Versatile Performance: Dual buckets with a 4340mm digging depth and 5481mm radius, plus 180° bucket rotation for multi-tasking.

  • Superior Maneuverability: With a 4300mm turning radius and 500mm ground clearance, this Articulating Wheel Loader easily navigates tight spaces.

  • Heavy-Duty Build: A robust 7840kg structure ensures reliable performance as top-tier End Loaders on any terrain.

  • Extended Operation: Equipped with 155L hydraulic and 100L diesel tanks, ensuring long work shifts with minimal downtime.

Engineered for precision and durability, this Construction Wheel Loader is the ultimate factory-direct solution for demanding agricultural and construction projects.

Product Details

Taian Zhengtai Backhoe Wheel Loader — Dig and Load on One Chassis

A 7,840 kg backhoe wheel loader with a 0.3 m³ rear digging bucket and a 1 m³ front loading bucket, powered by a Cummins 75 kW diesel engine. One operator excavates, loads and backfills on the same site — the machine does not need to be swapped between a trenching job and a loading job.

If your work sits between a compact wheel loader and a mini excavator — sites where a full-size machine cannot turn, but the job still needs real digging depth — this size class is where most contractors end up. Buyers comparing a front loader for sale against an excavator usually find the backhoe configuration removes one machine from the site.

ZTW30-25 backhoe wheel loader with precision bucket control, front loading bucket and rear digging arm

💪 Real Power, Real Performance

  • 0.3 m³ digging bucket + 1 m³ front loader. The rear bucket handles trench work and the front bucket moves spoil; both run off the same engine and hydraulic circuit, so the operator changes task without leaving the seat.

  • 7,840 kg operating weight, >25 kN rated lifting force. Enough mass to stay planted under a full 1 m³ bucket load, while remaining transportable on a standard low-bed trailer.

  • 5,481 mm max. digging reach and 180° bucket swing. The rear bucket can place spoil on either side of a trench, and reach trench edges a straight-mounted backhoe cannot access without repositioning the chassis.

  • 4,340 mm max. digging depth, 50 ±10% kN digging force, >40 kN breakout force. Typical water, gas and telecom trenches run well inside these limits, so the sides do not need benching.

⚡ Powered to Keep Moving

  • Cummins 75 kW diesel engine. Low fuel consumption relative to output, and service reachable through the Cummins network in most export markets — we confirm the nearest service point for your destination before the order is fixed.

  • Trenching, truck loading, grading and site clearing. Grade ability above 30° and 70–75 kN traction power keep the machine working on embankments and unpaved haul roads where a 4×2 utility loader loses grip.

  • 100 L diesel, 155 L hydraulic. The working window between fills covers a full shift on most sites, which matters where the fuel truck only arrives once a day.

🎯 Fits Where You Need It

  • Construction — dig foundations and move materials in the same shift, backfilling with the same machine that excavated.

  • Municipal work — excavate trenches, lay pipes and clear mud between utility poles and kerbs; 4,300 mm minimum turning radius against a 2,730 mm body width.

  • Landscaping — dig tree holes, move soil and shape land without a machine swap; the 0.3 m³ bucket gives the control that root-ball work needs.

  • Agriculture — channel digging, dredging and yard clean-out; 500 mm ground clearance keeps the underside clear on uneven field surfaces.

🛠️ What Changes When Two Decades of Export Sit Behind the Machine

Buyers searching for a wheel loader for sale often arrive at this page after comparing a compact wheel loader or a high lift wheel loader against a dedicated excavator. The trade-off is usually the same: a pure loader cannot trench, and a pure excavator cannot move spoil efficiently. A backhoe wheel loader covers both ends, which is why contractors running mixed municipal and site work tend to settle here rather than buy two machines.

The same calculation applies when buyers weigh a Chinese front end loader against a European or Japanese brand. Machines from SEM, Everun, Wolf or HZM are frequently compared with this unit on the same shortlist; the deciding factors are usually parts availability, container loading cost and whether the configuration is fixed against the buyer's ground conditions. As a backhoe loader manufacturer with more than 20 years of Chinese construction machinery export, we confirm bucket size, tyre specification and attachment set before the deposit, and quote a factory price that includes the export packing and the configuration you specify.

Buyers adding heavy equipment components — buckets, hydraulic cylinders, seals, filters — consolidate them into the same container. On a single-unit order that consolidation is usually the difference between a workable landed cost and an unworkable one.

Product Specifications

ItemUnitParameter
Backhoe bucket capacitym³0.3
Rated loading bucket capacitym³1
Rated lifting forcekN>25
Equipment weightkg7840
Backhoe parametersMax. digging radius (mm)5481
Max. dump height (mm)3737
Radius at max. dump height (mm)1084
Max. digging radius at ground level (mm)5105
Digging bucket max. rotating angle (°)180
Max. digging depth (mm)4340
Max. digging force (kN)50±10%
Loading parametersMax. dump height (mm)2626
Dump reach at max. dump height (mm)726
Bucket draw back angle — transportation position (°)43.5
Bucket draw back angle — ground position (°)36.5
Dump angle (°)43.5
Digging depth (mm)191
Max. breakout force (kN)>40
Max. grade ability°>30
Max. traction powerkN70–75
Min. turning radiusmm4300
Wheelbasemm2320
Front wheel trackmm1910
Rear wheel trackmm1820
Minimum ground clearancemm500
Total lengthmm7100
Total height (cab)mm2870
Total widthmm2730
Bucket widthmm2300
Digging end bucket widthmm750
Hydraulic tankL155
Diesel tankL100
Tire14-17.519.5L-24
VoltageV12
Engine—Cummins 75 kW

Manufacturing process certified to ISO.

ZTW30-25 backhoe wheel loader specification banner

Product Details

ZTW30-25 backhoe wheel loader hydraulic arm and rear digging bucket detail
ZTW30-25 backhoe wheel loader operator cab and control layout
ZTW30-25 backhoe wheel loader front loading bucket and chassis

Packing & Delivery

  • Container capacity. A 40HC container accommodates two units.

  • Machine body packing. The machine body is not enclosed in packing; it is fastened inside the container with wire ropes.

  • Spare parts packing. Spare parts and wearing components are packed in wooden boxes or paper cartons.

  • Shipping method. Container shipping is the standard method.

40HC container loading plan for two ZTW30-25 backhoe wheel loaders

Our Service

  • Customisation. OEM orders accepted, including brand integration, colour selection and other specific modifications.

  • Parts availability. A consistent spare-parts supply is maintained so wear items ship without a long lead time.

  • Client support. Factory tours and third-party quality inspections can be arranged before shipment.

  • Response time. All inquiries receive a reply within 24 hours.

  • Procurement assistance. We can act as your purchasing agent for complementary machinery and consolidate it into the same shipment.

ZTW30-25 backhoe wheel loader in operation on a mixed construction site

Frequently Asked Questions

Is this a wheel loader or a backhoe loader?

Both functions share one chassis: a 1 m³ front loading bucket and a 0.3 m³ rear digging bucket. Buyers who need a pure wheel loader for bulk stockpile work will find a dedicated machine faster at that single task; buyers who need to dig and load on the same site usually find the backhoe configuration removes a second machine from the job.

Can the machine be configured to my ground conditions?

Yes. Bucket size, tyre specification and attachment set are confirmed before the deposit. Send the ground type, typical trench or pit dimensions and site access width, and we return a written configuration list for approval.

How do I get a wheel loader price for my destination?

Send the destination port and the configuration you need. The reply is a factory price for that specification, with export packing included and no intermediary margin added. Buyers ordering two units share the 40HC container cost, which changes the landed price materially.

What certification does the machine carry?

Manufacturing is certified to ISO. No other certification is claimed for this unit.

Are loaders available near my region?

Machines ship by container to any commercial port. Buyers searching for wheel loaders for sale near me usually mean local dealer stock; for direct factory supply, send your destination port and we confirm shipping time and the nearest Cummins service point.

Leave your messages

Related Products

x

Popular products

x
x