ZTW30-25 Backhoe Loader — The "Construction Transformer"

The ultimate 2-in-1 solution. This 7.84-ton "iron warrior" perfectly combines powerful digging and efficient loading, simplifying equipment configuration like never before.

Made in Shandong, China with 24/7 support. Contact: WeChat / WhatsApp +86 139 5387 9973.

Why One ZTW30-25 Replaces Two Machines on a Tight Urban Site

The hidden cost of urban construction is not the machine — it's the parking space. A mini excavator for trenching, a compact wheel loader for backfilling, a service truck, and the operator handover between them: on a downtown residential job with a 20 m² laydown zone, that equipment stack simply does not fit. As an established loader manufacturer in Feicheng, Shandong with more than two decades of Chinese construction machinery export experience, Taian Zhengtai built the ZTW30-25 specifically for this problem. One 7,840 kg chassis, one operator, one diesel fill — and the same rig digs the trench with the rear backhoe, then spins around and backfills it with the front loader. The "Construction Transformer" angle is not marketing; it's a real equipment-config simplification that cuts fleet count, license paperwork, and site-occupancy by half.

The rear end is what earns the "Underground Expert" label. A 5,481 mm maximum digging radius and 5,437 mm at ground level span a standard utility trench plus operator offset without repositioning the chassis; 4,340 mm of digging depth reaches below residential footings and frost line; 50 ±10 kN of bucket-cylinder force drives the 0.3 m³ bucket through compacted clay and lightly weathered rock. The 90° left / 90° right swing with 163.2° bucket rotation delivers the "180° rotation, robotic precision" material-placement benefit — the operator digs on one side, swings, and dumps spoil directly into a dump truck parked on the other, no repositioning.

The front loader end is where the 40% efficiency claim comes from. The 1.0 m³ standard bucket, paired with a 2,328 mm bucket width, moves wider passes per cycle than a 0.8 m³ compact loader; >40 kN breakout force pries dense stockpiles in one scoop rather than requiring three teeth-and-pry attempts; the 2,626 mm dump height clears any standard on-road truck sideboard; and the 726 mm dump reach at full height puts the bucket directly over the truck bed centerline, which is the "zero-spillage loading" advantage that keeps street sweeping crews off your invoice. Rated lift force >25 kN holds a full bucket steady through the lift arc.

The mobility package is what makes the 2-in-1 math actually work on urban streets. The 75 kW Cummins engine delivers 70–75 kN of tractive effort and >30° gradeability, so the machine can climb a paved construction-site ramp loaded; 500 mm of ground clearance with 14-17.5NHS-14PR front and 15.5/80-24 rear industrial tires handles rutted unpaved shoulders and curb cuts without bottoming out; the 4,300 mm minimum turning radius inside a 7,080 mm long / 2,880 mm wide chassis lets the ZTW30-25 one-shot U-turn on a 6 m urban lane. The 2,870 mm high-roof cab gives panoramic visibility over parked cars and site fencing — which is the single operator-safety feature that wins urban project managers over. Every critical weldment, axle, and hydraulic valve is a domestically sourced heavy equipment component from our Shandong supplier cluster, so wearing parts are inexpensive and on the shelf in most destination ports.

We publish factory price directly, with no trading-company markup. Our 40HC container loading plan fits two ZTW30-25 units per container — the machine body travels bare inside the container and is secured by wire rope; spare parts and wearing parts ship separately in wooden boxes or cartons. Buying two units together cuts per-unit sea freight roughly in half, which is why fleet buyers running parallel urban jobs typically order in pairs (one active rig plus one backup or rental asset). Message us on WhatsApp / WeChat (+86 139 5387 9973) with your typical trench depth, truck loading height, site width constraints, cabin / engine configuration, order quantity, and destination port — we reply within 24 hours with on-site cycle-time demo videos, a full spec sheet, FOB/CIF quotation, and the 40HC loading plan.

Technical Specifications — ZTW30-25 Backhoe Loader

Detailed Photos

Packaging & Shipping

Packing & Delivery — Container 40HC: 2 units can be installed.

1. Standard packing — the machine body is without packing, but the machine will be well fastened and fixed in the container by wire rope.

2. Spare parts / wearing parts — packed in wooden box or paper carton.

3. Standard shipping method — by container.

Because two ZTW30-25 units fit in one 40HC container, the per-unit freight on a two-unit order is roughly half of a single-unit shipment — the most cost-effective route for a fleet that wants one active machine plus a backup.

Frequently Asked Questions (FAQ)

Made in Shandong, China — 24/7 Support

Tell us your typical trench depth, truck loading height, site width constraints, cabin / engine configuration, order quantity, and destination port. We reply within 24 hours with on-site cycle-time demo videos, a full spec sheet, factory price, and the 40HC loading plan (2 units per container).

Taian Zhengtai Construction Machinery Co., Ltd.
     Industrial Park, Shiheng Town, Feicheng City, Shandong Province, China

WhatsApp / WeChat: +86 139 5387 9973  ·  Email: woniuniu9527@163.com