High-Efficiency Hydraulic Backhoe Loader — Power Meets Precision
7,840 kg · 1 m³ front loading bucket · 0.3 m³ rear digging bucket · 180° bucket rotation · Cummins 75 kW
A 7,840 kg wheeled backhoe loader that carries a 1 m³ front loading bucket and a 0.3 m³ rear digging bucket on one chassis. One operator digs, loads and backfills on the same site without a machine swap, with 180° bucket rotation letting the rear arm place spoil on either side of a trench without repositioning.
Product Highlights
1 m³ high-capacity bucket. Front loading capacity is matched to standard truck beds at 2,626 mm dump height and 726 mm forward reach, so the truck does not need to reverse into an awkward angle.
180° rotating digging bucket. Spoil can be placed on either side of the trench without repositioning the chassis — the difference on trench lines that run parallel to a wall or kerb.
Fuel-efficient Cummins 75 kW engine. Low fuel consumption relative to output, with service reachable through the Cummins network in most export markets.
Operator-friendly controls. Proportional joystick control gives fine bucket movement for trench edges, root balls and utility crossings, which shortens the learning curve for a new operator.
Modular design. Hydraulic valves, hoses and the main pump are accessible from defined service points, so routine maintenance does not require dismantling the machine.
Robust 7,840 kg chassis. Enough mass to stay planted under a full 1 m³ bucket load, with 500 mm ground clearance on rutted and uneven ground.
🚀 Ideal for: construction sites, material yards, excavation projects and infrastructure development — where power, efficiency and reliability drive success.

Taian, Shandong — Construction Machinery Cluster Advantage
Our production base sits in Taian, Shandong — the core cluster of Chinese construction machinery. The supply chain for heavy equipment components — structural steel, hydraulic valves, precision steering assemblies — comes from specialised factories inside the cluster, which shortens production cycles and keeps the factory price competitive for export buyers. As a backhoe loader manufacturer, we test every hydraulic backhoe loader against ISO-controlled production standards before it leaves the line. The location also supports shorter lead times for Chinese construction machinery export.
Engineering Specifications
| Item | Unit | Parameter |
|---|---|---|
| Backhoe bucket capacity | m³ | 0.3 |
| Rated loading bucket capacity | m³ | 1.0 |
| Rated lifting force | kN | >25 |
| Equipment weight | kg | 7840 |
| Max. digging radius (backhoe) | mm | 5481 |
| Max. dump height (backhoe) | mm | 3737 |
| Radius at max. dump height (backhoe) | mm | 1084 |
| Max. digging radius at ground level | mm | 5105 |
| Digging bucket max. rotating angle | ° | 180 |
| Max. digging depth (backhoe) | mm | 4340 |
| Max. digging force (backhoe) | kN | 50 ±10% |
| Max. dump height (loader) | mm | 2626 |
| Dump reach at max. dump height | mm | 726 |
| Bucket draw back angle (transportation position) | ° | 43.5 |
| Bucket draw back angle (ground position) | ° | 36.5 |
| Dump angle | ° | 43.5 |
| Digging depth (loader) | mm | 191 |
| Max. breakout force (loader) | kN | >40 |
| Max. grade ability | ° | >30 |
| Max. traction power | kN | 70–75 |
| Min. turning radius | mm | 4300 |
| Wheelbase | mm | 2320 |
| Front wheel track | mm | 1910 |
| Rear wheel track | mm | 1820 |
| Minimum ground clearance | mm | 500 |
| Total length | mm | 7100 |
| Total height (cab) | mm | 2870 |
| Total width | mm | 2730 |
| Loader bucket width | mm | 2300 |
| Backhoe bucket width | mm | 750 |
| Hydraulic tank capacity | L | 155 |
| Diesel tank capacity | L | 100 |
| Tire (front/rear) | — | 14-17.5 / 19.5L-24 |
| Voltage | V | 12 |
| Engine | — | Cummins 75 kW |
| Certification | — | ISO |

Two Decades of Chinese Construction Machinery Export Experience
More than 20 years of Chinese construction machinery export has built a working 40HQ container loading plan that fits two complete hydraulic backhoe loaders in a single 40HC high-cube container. That halves the per-unit freight cost. The export team handles document preparation, certificate of origin, customs clearance and shipping coordination in-house, so the machine reaches the destination port on schedule. Working with international shipping carriers also gives competitive freight rates and flexible delivery schedules that align with project timelines.
Buyers comparing a compact wheel loader against a backhoe wheel loader usually arrive at the same question: does one machine that digs and loads beat two machines that do one thing each? On mixed municipal, agricultural and site work the answer is usually yes — the backhoe configuration removes a machine from the site and an operator from the payroll. Machines from SEM, Everun, Wolf or HZM are frequently on the same shortlist; the deciding factors are usually parts availability, container loading cost and whether the configuration is fixed against the working conditions.
Tailored Solutions for Demanding Working Environments
The 7,840 kg reinforced chassis delivers stability on uneven terrain, muddy construction sites and rocky landscapes. 500 mm minimum ground clearance lets the machine traverse obstacles and rough surfaces without getting stuck, and the 4,300 mm turning radius against a 2,730 mm body width gives the agility for confined urban construction areas, residential neighborhoods and indoor industrial facilities. The 155 L hydraulic system sustains consistent, responsive performance through extended digging, loading and material handling, which matters where the machine runs a full shift rather than intermittent cycles.
Solving Critical Pain Points for Construction Contractors
Integrating excavator and front loader functions into a single machine removes the need to rent or buy two pieces of equipment, which cuts capital expenditure and ongoing operational cost. The joystick control layout shortens the training period for a new operator, and the modular design keeps routine maintenance within defined service points rather than dismantling the machine. The Cummins 75 kW engine keeps operating expenses predictable, and the 100 L diesel tank covers a full shift on most sites.
Buyers adding heavy equipment components — buckets, hydraulic cylinders, seals, filters — consolidate them into the same container, which on a single-unit order usually decides whether the landed cost works.
Comprehensive Full-Lifecycle Customer Care
Support runs from configuration to service. Customisation covers cabin enhancements, attachment configuration and company branding. Core components — engine, hydraulic system and transmission — carry a 12-month or 2,000-hour warranty. The technical assistance team answers enquiries within 24 hours and provides remote operation and maintenance training, and the global spare-parts network keeps common wear items available without a long lead time.
Product Details
The 1 m³ loading bucket runs a 43.5° dump angle at 2,626 mm dump height for fast material placement, while the 0.3 m³ digging bucket uses 180° rotation to cover excavation angles that a fixed backhoe cannot reach.
The hydraulic system balances power with efficiency: 50 ±10% kN digging force at the rear bucket and >40 kN breakout force at the front, matched to a 155 L reservoir that keeps response steady through the shift. The adjustable seat and ergonomic levers reduce operator fatigue across extended operation periods.
Frequently Asked Questions
Are you a professional manufacturer or a trading company?
We are a specialised backhoe loader manufacturer with our own production base in Taian, Shandong, China, and more than 20 years of manufacturing and Chinese construction machinery export experience.
What is your container loading capacity?
Two complete hydraulic backhoe loaders fit in one 40HC high-cube container, which halves the per-unit shipping cost.
What warranty do you provide?
12 months or 2,000 operating hours on core components: engine, hydraulic system and transmission. Extended warranty options are available.
What is your production and delivery time?
Standard production time is 30 days after deposit. Shipping takes 25–45 days depending on the destination port.
Can you customize the machine according to my requirements?
Yes. Cabin upgrades, attachments (pallet forks, grapples, snow blades) and company branding are configured before the deposit, based on the ground conditions and the tasks the machine will run.
Is this a wheel loader or a backhoe loader?
Both functions share one chassis: a 1 m³ front loading bucket and a 0.3 m³ rear digging bucket. Buyers who need a pure wheel loader for bulk stockpile work will find a dedicated machine faster at that single task; buyers who need to dig and load on the same site usually find the backhoe configuration removes a second machine from the job.
How do I get a wheel loader price for my destination?
Send the destination port and the configuration you need. The reply is a factory price for that specification, with export packing included and no intermediary margin added.
Contact Us for a Factory Price Quote
Taian Zhengtai Construction Machinery Co., Ltd
Industrial Park, Shiheng Town, Feicheng City, Shandong Province, China
📞 WhatsApp / WeChat: +86 139 5387 9973
📧 Email: woniuniu9527@163.com