3-Ton Class Wheel Loader with Cummins Engine — Heavy-Duty Construction Equipment
Rated load 3,000 kg · operating weight 9,600 kg · 92 kW Cummins 6BT5.9-C125-II · 1.7 m³ bucket · 110 kN breakout force
Core Competitive Advantages
Cummins 6BT5.9-C125-II powertrain. Inline 6-cylinder, water-cooled, direct-injection diesel rated at 92 kW — service reachable through the Cummins network in most export markets.
≤10 s total working cycle. Boom lift completes in ≤5.6 s; the full lift-dump-lower cycle stays inside 10 seconds, which is what keeps truck loading steady across a shift.
35° articulation angle, 4,800 mm turning radius. The articulated chassis turns tight enough for yard corners and confined urban sites while keeping the rear axle on the same track.
Automatic bucket leveling as standard. The bucket holds a level plane through the lift, which reduces spillage on the way to the truck and shortens the learning curve for a new operator.
Gas-liquid caliper disc braking. Consistent stopping power on loaded downhill runs, with a service life longer than conventional dry brake setups in dusty conditions.
110 kN maximum breakout force. Enough to break compacted stockpiles and dense material without repeated ramming.
Product Overview
This wheel loader balances power, efficiency and durability for heavy-duty construction and material handling. A 92 kW Cummins diesel engine drives a 1.7 m³ bucket through a 110 kN breakout force, with automatic leveling keeping the load steady through the lift. The 3,150 mm dump height and 417 mm ground clearance cover both truck loading and rough terrain navigation.
Two figures are worth distinguishing up front: rated load capacity is 3,000 kg and operating weight is 9,600 kg. The 3-ton class name follows the rated load; the machine itself carries 9.6 tonnes of steel, which is where the stability under a full bucket comes from. Buyers searching for a compact wheel loader often end up at this size class once they compare bucket capacity against the width of the sites they actually work on.

Taian, Shandong — China's Construction Machinery Manufacturing Hub
Our production base sits in Taian, Shandong, the core cluster of Chinese construction machinery. The supply chain for heavy equipment components — structural steel, hydraulic valves, axles — comes from specialised factories within the cluster, which shortens production cycles and keeps the factory price competitive for export buyers. As both a wheel loader and a backhoe loader manufacturer, we test every 3-ton class loader at each stage of manufacturing, from raw material inspection to final performance validation. The location also supports shorter lead times and flexible production schedules for Chinese construction machinery export.
Technical Specifications
| Description | Specification |
|---|---|
| Rated load capacity | 3000 kg |
| Standard bucket volume | 1.7 m³ |
| Operating weight | 9600 kg |
| Maximum breakout force | 110 kN |
| Maximum dumping height | 3150 mm |
| Maximum dumping reach | 1150 mm |
| Dumping angle | 45° |
| Maximum gradeability | 30° |
| Automatic bucket leveling | Standard |
| Boom lifting time | ≤5.6 seconds |
| Total working cycle time | ≤10 seconds |
| Articulation steering angle | 35° |
| Minimum turning radius | 4800 mm |
| Wheelbase | 2580 mm |
| Wheel track | 1870 mm |
| Minimum ground clearance | 417 mm |
| Overall dimensions (L×W×H) | 7550 × 2385 × 3145 mm |
| Forward travel speeds | 1st gear: 0–6.8 km/h |
| 2nd gear: 0–12 km/h | |
| 3rd gear: 0–23 km/h | |
| 4th gear: 0–35 km/h | |
| Reverse travel speeds | 1st gear: 0–8.5 km/h |
| 2nd gear: 0–27 km/h | |
| Engine model | Cummins 6BT5.9-C125-II |
| Engine configuration | Inline 6-cylinder, water-cooled, 4-stroke direct injection |
| Rated power output | 92 kW |
| Certification | ISO |
Manufacturing process certified to ISO; no other certification is claimed for this unit.

20+ Years of Global Export Experience
More than 20 years of Chinese construction machinery export has built a record of delivering equipment to buyers in more than 20 countries. We have a working 40HQ container loading plan that transports one complete 3-ton class wheel loader per container, which keeps the shipping cost predictable and the machine protected in transit. The export team handles commercial documentation, customs clearance and door-to-door delivery coordination in-house.
Buyers comparing a compact wheel loader or a high lift wheel loader against this size class usually find the 1.7 m³ bucket and 3,000 kg rated load cover both stockpile work and truck loading on the same site, without a second machine. Machines from SEM, Everun, Wolf or HZM are frequently on the same shortlist; the deciding factors are usually parts availability, container loading cost and whether the configuration is fixed against the actual working conditions.
Built for Demanding Working Conditions
The reinforced chassis provides stability on uneven terrain, muddy job sites and rocky quarries. 417 mm ground clearance lets the machine pass over large obstacles without bottoming out, and the 4,800 mm turning radius fits confined urban sites, warehouse yards and residential developments. The Cummins engine has a service network in most export markets — we confirm the nearest service point for your destination before the order is fixed, and quote the recommended filter kit with the machine so the first service interval does not wait on an international parcel.

Solving Operational Challenges on Site
This wheel loader is specified around the problems that show up on real sites: a bucket that cannot break compacted material, a machine too wide for the yard, and a cycle that keeps the truck waiting. The 110 kN breakout force breaks the pile, the 35° articulation and 4,800 mm turning radius keep the machine moving in tight yards, and the ≤10 s working cycle keeps the truck loading at a steady rhythm. Automatic leveling reduces spillage on the way to the truck, and the durable construction keeps the service schedule predictable.
The design accepts a wide range of attachments — pallet forks, grapples, snow blades — so one chassis covers several yard tasks without buying a specialised machine for each. Buyers adding heavy equipment components — buckets, hydraulic cylinders, seals, filters — consolidate them into the same shipment.
Support Through the Equipment Lifecycle
Support runs from configuration to service. OEM customisation covers paint colours, company branding and attachment configurations. Genuine heavy equipment components are stocked so wear items ship without a long lead time. Core components — engine, transmission and hydraulic system — carry a 12-month or 2,000-hour warranty. Factory inspections and operator training can be arranged before shipment, and technical enquiries receive a reply within 24 hours.

Packaging & Global Shipping
Standard shipping configuration: one unit per 40HQ container.
Main machine. Fastened to the container floor with heavy-duty steel brackets and wire ropes to prevent movement in transit.
Loose components and spare parts. Individually wrapped and packed in fumigation-free wooden crates.
Shipping. International shipping lines with competitive rates and reliable schedules to ports worldwide.
Factory Visits & Quality Assurance


Frequently Asked Questions
Are you a direct manufacturer or a trading intermediary?
We are an integrated manufacturing company with our own production facility in Taian, Shandong, China. We design, manufacture and export wheel loaders, backhoe loaders and other construction equipment.
What payment methods do you accept?
T/T with 30% deposit on order confirmation and 70% balance before shipment. Irrevocable L/C at sight is accepted for large orders.
How long does it take to receive my order?
Standard production lead time is 30 days from receipt of deposit; some popular models ship from stock. Shipping takes 25–45 days depending on the destination port.
What quality control measures do you implement?
Every unit receives a full pre-delivery inspection against the signed configuration list, covering hydraulic system testing, engine performance and structural integrity checks. Third-party inspection (SGS / BV) can be arranged at any stage.
What warranty coverage do you provide?
12 months or 2,000 operating hours, whichever comes first, covering engine, transmission and hydraulic system.
How do I get a wheel loader price for my destination?
Send the destination port and the configuration you need. The reply is a factory price for that specification, with export packing included and no intermediary margin added.
Contact Us for a Factory Price Quote
Taian Zhengtai Construction Machinery Co., Ltd. is located in Industrial Park, Shiheng Town, Feicheng City, Shandong Province, China. Contact us to discuss your equipment requirements and receive a factory direct quote.
📞 WhatsApp / WeChat: +86 139 5387 9973
📧 Email: woniuniu9527@163.com
🏭 Factory address: Industrial Park, Shiheng Town, Feicheng City, Shandong Province, China